Possible Fixing Points On A Flat Roof - Ferroli ECOTOP VMF Instrucciones De Montaje

POSSIBLE FIXING POINTS ON A FLAT ROOF

Notes: Each single adjustable support 076187X0 for flat roofs must be secured against slipping and overturning due
to the wind, with at least two diameter 12 screws (to be chosen as required): directly on the roof structure, making
sure to seal the holes to prevent water from entering, or on a substructure arranged by the customer.
Example of substructure: concrete slabs, iron/cast iron plates, steel I-beams, concrete slabs plus anchoring, etc.
Attention: The substructure arranged by the customer must be able to absorb the wind load on the collectors and
be fixed in such a way as to not damage the roof.
NOTE: In case of installation in particular situations, a prior static/structural study is advisable. To make the fixing
system even more stable, the number of support kits 076187X0 can be increased.
• •
= RECOMMENDED FIXING POINTS IN = RECOMMENDED FIXING POINTS IN
NORMAL LOAD CONDITIONS NORMAL LOAD CONDITIONS
25 25 25 25 25
100
Version VMF/VMFA
450
1300
Version VRF/VRFA
450 1300
36
EN
100
1200 1275
1200 1200
cod. 3541D350 - Rev. 03 - 11/2014
ECOTOP VMF/VMFA/VRF/VRFA
X X
= RECOMMENDED FIXING POINTS IN = RECOMMENDED FIXING POINTS IN
HIGH LOAD CONDITIONS HIGH LOAD CONDITIONS
1795
1200 1200
1200 1200 1200
Ø 12.5 12.5 x 50
245 705
1395 450
1395 450 245 705
245
245