Ferroli ECOTOP VMF Instrucciones De Montaje página 33

ECOTOP VMF/VMFA/VRF/VRFA
5 - Insert the first two clamps inside the profiles and position the M8x75 hex. socket screws on the first hole (fig. 6).
Attention: Tighten the screws until the profile is secured to the clamps, in order to eliminate any play.
A
10 Nm
6 - Carefully place the collector, making sure it is resting on the clamps and brackets to (fig. 7 detail A).
Insert the second pair of clips and fit them exactly in the cavity in the sides of the collector (detail B).
A
B
A
A
fig. 6
A
B
fig. 7
cod. 3541D350 - Rev. 03 - 11/2014
33
EN