Publicidad
Idiomas disponibles
Idiomas disponibles
EN
36
Note on location
•
Keep the device away from heat and avoid direct sunlight. To avoid rust or
reduction in insulation effect, do not place the freezer in damp or wet places.
•
Do not spray or wash the freezer. To avoid affecting the electrical insulation
properties of the freezer, do not place the freezer in damp places that are
easily splashed with water.
•
The freezer should be placed in a well-ventilated indoor location. The floor
must be level and stable. (Turn the adjustable feet left or right to properly level
the freezer if it is unstable.)
•
The distance to the top of the freezer must be more than 30 cm, and the
clearances to both sides and the back must be more than 10 cm to facilitate
heat dissipation.
OPERATION
Before first use
•
Before using the freezer, remove all packing materials, including the bottom
pads, the foam pads and straps inside the freezer. Peel the protective film off
the freezer door and body.
•
When starting up for the first time, the freezer must run for half an hour
before connecting to the power supply. The freezer must run for 2 to 3 hours
before fresh or frozen food is placed in it. In summer, the freezer must run for
more than 4 hours when the ambient temperature is high.
Adjusting the thermostat
•
The markings on the dial indicate the
"MIN", "NORMAL", "MAX" and "OFF"
settings for the different temperature
levels.
- "MIN." is the warmest setting.
- "MAX." is the coldest setting.
•
For normal use, set the knob to the
"NORMAL" position.
Recommended level: "NORMAL".
Publicidad
