Oase InScenio FM-Master Home Cloud Instrucciones De Uso página 25

Connecting
NOTE
The OC connection must always be connected. Either through the plug of an OASE Control cable
or the OASE Control end resistor (R).
The unit will be damaged if water enters a connection.
 The rubber seal of the plug connector must be clean and must fit exactly.
 If the rubber seal is damaged, it must be replaced. If the connection is disconnected, an older
rubber seal (> 2 years) must be replaced.
Always secure the plug connection with 2 screws.

EN
FMR0070
25