Publicidad
Idiomas disponibles
Idiomas disponibles
Energy saver _2
This icon will light up when you press the Energy Saver button. The Energy Saver function
is
automatically
set to "ON" when power is supplied
to the Refrigerator.
If condensation
occurs on the doo
turn the Energy Saver mode off.
Lighting
=8.,,,
This icon will light up when you press the Lighting
button.
In this case, the dispenser
light(under the
display) will be on constantly.
If you would like the dispenser
light to come on only when using the
dispenser,
turn the Lighting mode off.
Alarm _))
This icon will light up when you press the Alarm
button. The door alarm will sound if any door is open f
more than 3 minutes. The beeping stops when you close the door. Initially the Alarm is set to on.
Fridge ice off [_
Ice Off
This icon will light up when you press the Fridge ice off button. In this case, the fridge ice will not be produced.
Freezer Ice off []
Ice Off
This icon will light up when you press the Freezer
Ice Off button.
In this case, the freezer ice will not be
produced.
, As this refrigerator
has a dual Ice Maker, there is a possibility
of using more energy. We
_==.J
recommend
if you have enough ice, set ice off to save energy.
, You may occasionally
hear noises from Ice dropping
or water flowing to the icemaker. These
noises are part of normal operation.
Lock I_
This icon will light up when you press the Lock button.
In this case, you won't be able to use the control
panel. If you press and hold the Ice Off/Hold
button for 3 sec to unlock Child Lock, you will be able to u
the control panel again.
CONTROLLING THE TEMPERATURE
Basic temperature
of Freezer and Refrigerator
Compartments
The basic temperature and/or recommended temperatures of the Freezer and Refrigerator Compartments are -2°F
and 38°F respectively.
Ifthe temperature of Freezer and Refrigerator Compartments are too high or low, adjust the temperature manually.
Controlling
the Freezer temperature
The Freezer temperature can be set between -8°F and 8°F to suit your
particular needs. Press the Freezer button repeatedly until the desired
temperature is shown in the temperature display. The temperature will
move 2°F degrees with each press (-2°F _ -4°F _ -6°F -_ -8°F _ 8°F -_
6°F -_ 4°F _ 2°F -_ 0°F _ -2°F). Keep in mind that foods like ice cream
may melt at 4°F. The temperature display will move sequentially from -8°F
to 8°R Five seconds after the new temperature is set, the display will show
the actual current freezer temperature until the new temperature is reached.
Using the Power Freeze
If you need a lot of ice or if you want to cool down the freezer faster, you
can use the Power Freezer function. Press and hold the Freezer/Power
Cool button for 3 seconds. Then, the power freeze indicator will light and
activate the power freeze mode independent of the freezer set temperature.
If you select Power freeze, the inside temperature of the freezer will
decrease for about two and a half hours. When you have enough ice, just
press and hold the button for 3 seconds again to cancel the Power Freeze
mode. Then, the indicator will go out and the freezer will return to the set
temperature again.
Publicidad
