Publicidad
Idiomas disponibles
Idiomas disponibles
3ott
ron
Door Rofr rator
GETTING READY TO INSTALL THE REFRIGERATOR
Congratulations
on your purchase
of the Samsung
French Door Refrigerator. We hope you enjoy the state-of-art
features and efficiencies
that this new appliance
offers.
Selecting
the best location
for the Refrigerator
• A location with easy access to the water supply.
• A location without direct exposure to sunlight.
A location with level (or nearly level) flooring.
A location with enough space for the Refrigerator doors to open easily.
Allow sufficient space for air circulation of the internal cooling system.
If the Refrigerator does not have enough space, the internal cooling system may
not work properly.
If your refrigerator
has an ice maker, allow extra space at the back for the water line connections.
When you install the refrigerator
next to a fixed wall, minimum
clearance
is 3 3A" (95mm) between the refrigerator
and wall to allow the door to swing open.
First thing! Make sure that you can easily move your Refrigerator
to its final location by measuring
doorways
(both width and height), thresholds,
ceilings, stairways,
etc.
The following
chart details the exact height and depth of Samsung
French Door Refric erator.
Model
RF268AB
35_3A"
(90.8cm)
Height
68_% 7'
(174.40m)
Overall
Height "D"
69_3A 7'
(177.40m)
Depth
"E 77
O
O
A
CAUTION
Allow clearance to the right, left, back and top when installing. This will help
reduce power consumption
and keep your energy bills lower.
Do not install the Refrigerator
where the temperature
will go below 50°F (10°C).
Do not locate the refrigerator
where it may become wet.
When moving your refrigerator
To prevent floor damage,
be sure the front adjusting
legs
are in the up position(above
the floor).
Refer to 'Adjusting
the doors'
in the manual (on page 15).
!
Flat-blade
FLOORING
screw
driver(-)
For proper installation,
this refrigerator
must be placed on a level
surface of hard material that is the same height as the rest of the
flooring. This surface
should be strong enough to support
a fully
loaded
refrigerator,
or approximately
3281bs (150kg). To protect
the finish of the flooring,
cut a large section
of the cardboard
carton and place under the refrigerator
where you are working.
When
moving the refrigerator,
be sure to pull it straight
out and
push it back straight in.
Control Lever
8 Settng up
Publicidad
