Makita GA7090 Manual De Instrucciones página 18

-
14
15
16
17
18
19
20
21
22
23
-
NOTE: *1 Do not use Super Flange and Ezynut together.
NOTE: *2 Only for tools with M14 spindle thread.
NOTE: *3 Use Inner flange 78 and Outer flange 78 together. (Australia and New Zealand only)
NOTE: *4 Use the Side grip for dust collecting wheel guard and the Dust collecting wheel guard for cutting-off
together.
NOTE: *5 For more details, refer to each instruction manual of the guard.
OPTIONAL
ACCESSORIES
CAUTION:
These accessories or attachments
are recommended for use with your Makita tool
specified in this manual. The use of any other
accessories or attachments might present a risk of
injury to persons. Only use accessory or attachment
for its stated purpose.
If you need any assistance for more details regard-
ing these accessories, ask your local Makita Service
Center.
• Accessories listed in "COMBINATION OF
APPLICATIONS AND ACCESSORIES"
NOTE: Some items in the list may be included in the
tool package as standard accessories. They may
differ from country to country.
Application
Wire brushing
Hole cutting
-
Cutting-off
Grinding / Cutting-off
-
-
-
-
Cutting-off
-
18 ENGLISH
180 mm model
Wire cup brush
Hole cutter
Wheel guard (for cut-off wheel)
Abrasive cut-off wheel / Diamond wheel
Dual purpose wheel
Inner flange 78 (Australia and New Zealand only) *3
Outer flange 78 (Australia and New Zealand only) *3
Side grip for dust collecting wheel guard *4
Dust collecting wheel guard for cutting-off *4*5
Diamond wheel
Lock nut wrench
230 mm model
-