Publicidad
Idiomas disponibles
Idiomas disponibles
RONDOSTAT HR10, HR27, HR35
Parameters
Press and hold the
button for
1
5 seconds to enter the parameter menu
auto
5s
Press the
and
buttons to cycle
4
through the parameter settings
TIME PROG
Display
Description
1
Language
LANGUAGE
2
Preset time programs
TIME PROG
3
Screen rotation
ROTATE
4
Backlight (HR27 & 35 only)
BACKLIGHT
5
Automatic summer/winter time change
AUTO TIME
6
Open window detection (Closes the radiator valve)
WINDOW
7
Valve stroke setting
STROKE
8
Displayed temperature
ROOM TEMP
9
Upper temperature limit (Maximum temperature which
HI LIMIT
the setpoint can be adjusted to)
10
Lower temperature limit (Minimum temperature which
LO LIMIT
the setpoint can be adjusted to)
11
Pre Heat (HR35 only) (Opens the radiator valve 40 mins
PRE HEAT
before the programmed temperature)
12
Temperature offset (Adjusts the display temperature to
CALIBRATE
more accurately represent the actual room temperature)
13
Restore to factory settings
FULLRESET
Exit the parameter menu
EXIT MENU
Press the
and
buttons to cycle
2
through the parmeter list
TIME PROG
Parameter
Press the
button to save the parameter
5
setting (or press
to go back without saving)
saved
Press the
3
setting
TIME PROG
Press the
6
cycling through the parmeter list
Rotate
Setting
1 = DE
2 = EN
3 = NL
4 = FR
5 = IT
6 = ES
0 = Week program 1 "At home all day"
1 = Week program 2 "At home for lunch"
2 = Week program 3 "Working half-time"
0 = Right side of radiator
1 = Left side of radiator
0 = OFF
1 = ON
0 = Not active
1 = Active
0 = OFF
1 = ON
0 = Standard Stroke Mode
1 = Full Stroke Mode
0 = Programmed temperature (Setpoint)
1 = Room temperature (Actual)
5°C to 30°C
(in 1°C increments)
5°C to 30°C
(in 1°C increments)
0 = Not activated
1 = Activated
-3.0°C to +3.0°C (default 0°C)
(in 0.5°C increments)
0 = No reset
1 = Reset to factory settings
EN
button to edit the parameter
Setting
and
buttons to continue
Publicidad
