ACD GRUPPE MFT10 Guía Breve página 10

2.4 Mounting Kit RAM Mount
Mounting kit RAM mount for fastening the MFT10/MFT12 terminal onto a vehicle.
Figure 15: Mounting Kit RAM Mount
2.4.1 Security Advices
Unintended use of the mounting kit should be avoided.
ATTENTION
Prior to each journey, the mounting kit must be inspected for
damage (tear, deformation). Defective mounting kits must be
replaced for your own safety.
ATTENTION
2.4.2 Mounting
The RAM mount plate VESA 75 is mounted on the MFT10/MFT12 with the 4x screws (M6 x 18) and the 4x U
washers (M6). The RAM mount arm 143 mm (MFT10) or 213 mm (MFT12) is mounted between the RAM
Mount plates VESA 75. See illustration 15.
Connecting the power supply cable: see section 2.2.
MFT10_MFT12_Accessories_Accesorios_Brief_Overview_Resumen_breve_FCC_V1.10_en_es
RAM mount plate VESA 75
RAM mount arm 143 mm (MFT10)
RAM mount arm 213 mm (MFT12)
RAM mount plate VESA 75
10 / 28