Publicidad
Idiomas disponibles
Idiomas disponibles
2.3 Mounting Fit Flat Standard
Mounting kit flat bracket, standard for mounting terminal MFT10/MFT12.
Figure 14:
ounting Kit Flat Standard
M
2.3.1 Security Advices
Unintended use of the mounting kit should be avoided.
ATTENTION
Prior to each journey, the mounting kit must be inspected for
damage (tear, deformation). Defective mounting kits must be
replaced for your own safety.
ATTENTION
2.3.2 Mounting
The intermediate piece must first be mounted on the MFT10/MFT12 with the 4x screws (M6 x 10, included
with delivery of the MFT10/MFT12). Both vertical and horizontal mounting are possible. Then mount the flat
bracket on this intermediate piece with the 2x screws (M8 x 14).
Connecting the power supply cable: see section 2.2
MFT10_MFT12_Accessories_Accesorios_Brief_Overview_Resumen_breve_FCC_V1.10_en_es
Intermediate
Flat bracket
9 / 28
Publicidad
