ACD GRUPPE HasciSE Set Guía Breve página 10

5.2 Inserting the HasciSE into the DSHasciSE
Figure 3: Inserting the HasciSE into the DSHasciSE
Place the docking station correctly on a smooth and clean
underground, which is not exposed to direct sunlight.
ATTENTION
When the backhand scanner is inserted into the docking station,
the scanner can be triggered.
Do not look into the laser beam.
ATTENTION
Do not leave the backhand scanner incl. battery in the charger or
docking station for an unnecessarily long time.
ATTENTION
5.3 Switching on the HasciSE
To turn on the backhand scanner please use the following key:
"Scanner button" (hold for approx. two seconds)
The status LED lights up pulsing white as soon as the backhand scanner is switched on and ready for use.
You can see the button, you have to press to switch on the device as shown in Figure 4.
Figure 4: Switching on the HasciSE
HasciSE Set_Brief Overview_Resumen breve_FCC_V1.11 10 / 54