Publicidad
Idiomas disponibles
Idiomas disponibles
7. Before initial use
7.1 Unpacking
Take the product out of the packaging.
•
Completely remove all packaging materials.
•
Check the package contents for completeness. Contact Service immediately in case of missing
•
components.
CAUTION! Material damage!
The filter (8) inside of the device is packed in additional plastic bag. Make certain to remove the plastic
bag before using the device for the first time. Refer to the 'Changing the filter' section.
7.2 How the air purifier works
An internal fan draws ambient air into the device through a high-quality filter (8).
The filter (8) removes particles, such as household dust, pollen, mould spores, smoke and so on, from the
air, resulting in a significant reduction of said particles in the ambient air. The activated carbon filter
contained within the filter (8) minimises and neutralises odours.
The device has a timer function that switches it off automatically and a sleep mode for quiet operation at
night.
The ion function electrically charges (ionises) air particles (atoms and molecules) inside of the air purifier
and then releases them into the ambient air using the fan. Oppositely charged ions and particles in the air
cling to each other, which makes them fall to the ground more easily, thereby stopping them from floating
about in the ambient air.
8. Initial use
A plastic odour may occur within the first hours of initial use. The manufacturer is aware of
this odour; it not harmful to health and will cease after a certain period of operation.
8.1
Visual indicator for ambient air quality via the LED ring light (12)
The control panel (1) is surrounded by an LED ring light (12). The LED ring light illuminates in different
colours to indicate the amount of dirt particles in the ambient air.
LED ring light indicator colours (12)
green
yellow
red
Ambient air quality
good
moderate
poor
SilverCrest SLR 30 B1
English – 27
Publicidad
