Publicidad
Idiomas disponibles
Idiomas disponibles
• S&P cannot be held liable in any way for injuries or damage to objects due to
failure to comply with the safety rules or any changes made to the product.
• You should regularly check the labels and markings on the product. These
EN
should be replaced when they become illegible.
• Once the installation is complete, make the manual available for the end user
for subsequent queries.
1.2. SAFETY INSTRUCTIONS
The installation of this device, any adjustments and any intervention must be
done by a professional electrician, who must apply the installation rules and the
safety rules in force.
Before switching on the power supply, check that the voltage of the power supply
matches the indications for the product: connecting it to a different voltage could
destroy it.
Since this material must be built into an installation, it must be checked that all
pieces work together and be signed off by the final installer. Do not change the
factory pre-set wiring.
Comply with the installation and connection plan recommended by the manu-
facturer. Contact your installer before making any installation or changes to the
wiring.
The electronic signals sent by this device should not be used for any other pur-
pose other than that described in this manual, since if this information is not
followed, it could have severe consequences for the operator and/or the device.
Unplug the device before any intervention (installation and maintenance ope-
rations) to be made by authorised staff. Even when the product is not plugged
into the mains, it can have dangerous voltage levels in external control circuits
1.3. STORAGE
Each product is scrupulously checked before being shipped. Upon receiving it,
you should check to make sure it hasn't been damaged during transport. This
product should be stored away from the elements and protected from bumps and
strains caused by projections of any kind during transport form the supplier to
the end customer and in the place before installation.
• Permitted temperature: 0°C to 45°C.
• Admissible relative humidity: maximum 90% without condensation.
12
Risk of electric shock.
Publicidad
