3.2. INSTALLATION LOCATION
Sensor to be attached to the ceiling of the room to be modulated: Recommended
installation height: between 2.5 m and 3.5 m.
EN
Installation height (m)
Specifically avoid: double detection, dead zones, disruptions caused by the su-
rroundings (heat sources like radiators, solar rays, etc.). Electrical connection
according to the type of actuator: check the specific installation instructions for
each AJUST'AIR
Example of dual control of input or flow register:
14
2,5
3
3,5
system.
®
Input or
register
Diameter D of the detection range on the floor (m)
Presence
detector(s)
8,2
9,8
11,6
Fan