Publicidad
Idiomas disponibles
Idiomas disponibles
',,_
iiil ....
Unpacking
1.
Remove unit from carton and discard all packaging.
HOW TO SET UP YOUR
UNmT
Location
of the Air Compressor
®
Locate the air compressor
in a
clean, dry and well ventilated
area.
,
The air compressor
should be
located at least 12" away from
the wall or other obstructions
that will interfere with the flow of
ain
®
The air compressor
pump and
shroud are designed to allow for
proper cooling. The ventilation
openings on the compressor are
necessary to maintain proper
operating temperature.
Do not
place rags or other containers on
or near these openings.
GROUNDING
INSTRUCTIONS
_Riek
of Electrical
Shock.
In the
event of a short circuit,
grounding
reduces
the risk of shock by pro-
viding an escape wire for the elec-
tric current.
This air compressor
must be propermy grounded.
The portable air compressor
is
equipped with a cord having a
grounding wire with an appropriate
grounding plug (see following illustra-
tions).
1.
The cord set and plug with this
unit contains a grounding pin.
This plug MUST be used with a
grounded outlet.
IMPORTANT: The outlet being used
must be installed and grounded in
accordance
with all loca! codes and
ordinances.
Make sure the outlet being used
has the same configuration
as
the grounded plug. DO NOT
USE AN ADAPTER. See illustra-
tion.
Grounding
Pin
Inspect the plug and cord before
each use. Do not use if there are
signs of damage.
If these grounding instructions
are not completely
understood,
or if in doubt as to whether the
compressor
is properly ground-
ed, have the installation checked
by a qualified electrician.
GROUNDING
CAN RESULT IN
ELECTRICAL
SHOCK,
Do not modify the plug provided.
If
it does not fit the avaiBable outlet,
a correct
outBet should
be installed
by a quaBified electrician.
Repairs
to the cord set or pBug
MUST be made by a qualified
emec-
trician.
A10819
10-ENG
Publicidad
