Velleman CAMIP4 Manual Del Usuario página 10

Note: always remember the admin password, as it is not possible to configure the camera without
it.
• The NTP date and time settings can be set via the Date/Time menu. When connected to the
Internet, the camera can synchronise its internal date and time setting using a time server (e.g.
ntp.asql.co.uk - refer to
• The firmware of the camera can be upgraded via the Upgrade page. Upgrade can be done from a
local file or using an ftp server.
Warning: be very careful when loading new firmware into the camera. Loading
wrong firmware will render it useless.
An upgrade should not be performed unless the necessity is proven.
The operation should be carried out by a qualified person only.
Never power off the camera during upgrade.
The manufacturer or dealer will not accept responsibility for any ensuing
defects or problems.
17/07/2009
CAMIP4
www.ntp.org for a list) through the NTP protocol.
10
Rev. 02
© 2008 Velleman nv