Camera List - Velleman CAMIP4 Manual Del Usuario

• The firmware filename can be found by browsing to the ftp-site (ftp:60.250.194.78), username
upgrade and password upgrade. Scroll through the available list and locate the correct version.
The name must start with VS316-gen.
• To reboot the camera, go to the reboot page and click on Reboot.

7.4 Camera List

• Once a camera has been set-up in the Auto Search directory, it must be added to the Camera
List. Right-click on Camera List and left-click on New Camera.
Note: when the camera is not added to the Camera list, it will not be available worldwide.
• Give the camera a name (e.g. its location), enter the camera ID and password and click Add. The
camera now appears under the Camera List directory.
Note: the icon in front of the camera name indicates the status.
RED: the camera is offline, not connected to the Internet
YELLOW: camera is online, but not responding (e.g. due to router settings)
GREEN: camera is online and responding
• Cameras can be grouped and placed under specific folders. To create a new folder, right-click on
Camera List and left-click on New Folder. Give the folder a name and click OK.
• Simply drag & drop the desired cameras under the newly created folder.
• To rename a folder, right-click on the folder and left-click on Rename. Give a new name and click
OK.
Note: the folder names CameraList and Auto Search can not be renamed.
• To delete a folder, right-click on the folder and left-click on Delete.
17/07/2009
CAMIP4
11
Rev. 02
© 2008 Velleman nv