Velleman CAMIP4 Manual Del Usuario página 12

Note: if there were cameras under the deleted folder, they will move back under the Auto Search
folder.
• When right-clicking on a camera under the Camera List directory, following options are available:
• First click on the desired playback-window, then right-click on the desired camera and left-click on
Play on selected window. The images are shown in the desired area.
• Click on ID/Password settings to edit camera name.
• Click on Video settings to adjust the cameras' video setup:
Notes:
• Set Bandwidth to match the locations' uploading bandwidth.
• Set Auto Select to enable to automatically set the most appropriate camera settings to
match the current network.
• Higher frame rates require more bandwidth.
• Set Preference to the users' most important feature : Video motion or image quality
• Enable Time on video to see the date and time at the cameras' location displayed.
• Switching between PAL and NTSC can only be done via Webconfig – Video settings.
• Choose the Brightness from 10 predefined values.
• Select the Motion Detection Sensitivity between high, medium and low
• After adjusting the settings, click the Update button. The administrators' account and
password are required.
17/07/2009
CAMIP4
12
Rev. 02
© 2008 Velleman nv