cecotec POWER PULSAR 2300MAX Manual De Instrucciones página 30

ENGLISH
4. CLEANING AND MAINTENANCE
- Unplug the appliance from the power supply and allow it to cool down before cleaning.
- Do not put the blender arm in the dishwasher or immerse it in water.
- After processing very salty food, rinse the blades with water immediately.
- Use a soft, damp cloth to clean the outside of the hand blender.
- Wash the blender measuring cup, chopper container, chopper blade unit and its
coupling in the dishwasher or in hot water with a little washing-up liquid. Dry and store
accessories in a dry and safe place.
- Please handle the blades carefully, they are very sharp.
Cleaning the blades
To clean the blending shaft properly, place 300 ml of lukewarm water in the blender jug with
a little dishwashing soap, insert the blending shaft into the soapy water up to the bottom of
the blender jug, and run the blender in turbo mode in 10-second intervals. Empty the contents
of the blender jug and refill it with 300 ml of clean water and repeat the same operation for
rinsing. Repeat this process if necessary. Be cautious of splashes.
5. TECHNICAL SPECIFICATIONS
Product reference: 03909/03910
Product: Power Pulsar 2300MAX/ Power Pulsar 2300MAX Cream&Crush
Rated power: 400 W
Maximum power with the motor blocked: 2300 W
Voltage: 220-240 V
Frequency: 50/60 Hz
Technical specifications may change without prior notification to improve product quality.
Made in China | Designed in Spain
6. DISPOSAL OF OLD ELECTRICAL AND ELECTRONIC APPLIANCES
This symbol indicates that, according to the applicable regulations, the product
and/or batteries must be disposed of separately from household waste. When
this product reaches the end of its shelf life, you should dispose of the cells/
batteries/accumulators and take them to a collection point designated by the
local authorities.
30
POWER PULSAR 2300MAX _ POWER PULSAR 2300MAX CREAM&CRUSH