Publicidad
Idiomas disponibles
Idiomas disponibles
VLP 18
Securing the carrying strap
To transport objects with the tool easier and
more safely, a carrying strap can be attached.
The carrying strap is available as an accessory.
Secure the carrying strap with the hook to
two of the retaining tabs as required.
Operating instructions
Lifting capacity
NOTE
A safety factor of 2 is taken into account in the
officially permissible load capacity of 130 kg.
The device must not be used to lift loads
heavier than 130 kg, regardless of the
maximum holding force of 170 kg shown on
the display.
Maximum holding forces (estimated), tested
on various materials:
Glass
Ceramic tile
Metal
Plastic
Wood
Subconcrete
Dry-cast pav-
ing slabs
Gypsum card-
board
NOTE
If the vacuum drops below -0.65 bar
(-65 kPa), the tool starts the pump
automatically (if the pump is switched on)
and achieves the pressure necessary for
use in this way.
For very uneven objects, a flexible seal is
available as an accessory.
Lifting techniques
NOTE
Think about what you want to lift and how
you are going to lift it. Observe the weight of
the object when doing this.
Consider whether the object can be lifted
alone.
Ensure that the working area is flat, dry
and free of obstacles.
Check the route. Ensure that the path is
clear. Remove trip hazards and obstacles.
Check for wet or smooth surfaces.
Use ergonomic equipment.
Use lifting aids such as fork-lift truck, sack
truck, equipment trolley, pallet truck or
lifting platform.
Make sure that you are suitably trained
before using the equipment.
Request assistance if necessary. Bulky or
heavy loads should be lifted by two
persons. Lift evenly and keep the load
straight.
Vertical
Parallel
holding
holding
force (kg)
force (kg)
170
120
170
120
110
100
100
65
80
80
75
65
23
Publicidad
