Flex VLP 18 Instrucciones De Funcionamiento Originales página 26

Recycling raw materials instead of
waste disposal.
The device, accessories and packaging
should be recycled in an environmentally-
friendly manner. Plastic parts are identified
for recycling according to material type.
WARNING!
Do not throw batteries into the household
waste, fire or water. Do not open end-of-life
batteries.
EU countries only: In accordance with
directive 2006/66/EC, defective or used
batteries must be recycled.
NOTE
Please ask your dealer about disposal
options.
Declaration of Conformity
We hereby declare that the product described
under Technical data complies with the
following standards or normative documents:
EN 62841 according to the provisions of
directives 2014/30/EU, 2006/42/EC,
2011/65/EU.
Responsible for technical documents:
FLEX-Elektrowerkzeuge GmbH, R & D
Bahnhofstrasse 15, D-71711 Steinheim/Murr
Peter Lameli
Technical Head
21.08.2023
FLEX-Elektrowerkzeuge GmbH
Bahnhofstrasse 15, D-71711 Steinheim/Murr
Declaration of Conformity
We as the manufacturer: FLEX
Elektrowerkzeuge GmbH,
Business address: Bahnhofstr. 15,
71711 Steinheim, Germany
declare under our sole responsibility, that
the product(s) described under „Technical
specifications" fulfills all the relevant provi-
sions of The Supply of Machinery (Safety)
Regulations S.I. 2008/1597 and also fulfills
all the relevant provisions of the following
UK Regulations:
26
Klaus Peter Weinper
Head of Quality
Department (QD)
Electromagnetic Compatibility Regulations
S.I. 2016/1091, The Restriction of the Use
of Certain Hazardous Substances in Electri-
cal and Electronic Equipment Regulations
S.I. 2012/3032 and are manufactured in
accordance with the following designated
Standards: BS EN 62841-1+A11:2015,
BS EN 55014-1:2021, BS EN 55014-2:2021
Place of declaration: Steinheim, Germany.
Responsible person: Peter Lameli,
Technical Director – FLEX-Elektrowerk-
zeuge GmbH
Contact details for Great Britain:
FLEX Power Tools Limited,
Unit 8 Anglo Office Park, Lincoln Road,
HP 12, 3RH Buckinghamshire,
United Kingdom.
Peter Lameli
Technical Head
21.08.2023
Exemption from liability
The manufacturer and its agent are not liable
for any damage and lost profit due to
interruption in business caused by the product
or by an unusable product. The manufacturer
and its agent are not liable for any damage
which was caused by improper use of
the power tool or by use of the power tool with
products from other manufacturers.
VLP 18
Klaus Peter Weinper
Head of Quality
Department (QD)