SOLAC HU1052 Instrucciones De Uso página 12

CLEANING
Disconnect the appliance from the mains and allow it to cool
•
before undertaking any cleaning task.
Clean the electrical equipment and the mains connection with
•
a damp cloth and dry. DO NOT IMMERSE IN WATER OR ANY
OTHER LIQUID.
Clean the equipment with a damp cloth with a few drops of
•
washing-up liquid and then dry.
Do not use solvents, or products with an acid or base pH such
•
as bleach, or abrasive products, for cleaning the appliance.
Never submerge the appliance in water or any other liquid or
•
place it under running water.
Never submerge the connector in water or any other liquid or
•
place it under running water.
If the appliance is not in good condition of cleanliness, its
•
surface may degrade and inexorably affect the duration of the
appliance's useful life and could become unsafe to use.
Then dry all parts before its assembly and storage.
•
There may be some scale deposits in the transducer, particularly
•
in areas with hard water:
- Overcome this drawback by cleaning the transducer.
- Rub down with a dry cloth and remove remains of moisture.
- Do not place the transducer directly under the tap.
- Do not rub the transducer with hard or metal objects.
- Do not clean with chemical products.
HOW TO DEAL WITH LIME SCALE INCRUSTATIONS:
For the appliance to work correctly it should be kept free of
•
limescale or magnesium incrustations caused by the use of
hard water.
To prevent this kind of problem, we recommend the use of water
•
with low lime or magnesium mineralisation.
EN