Settings Menu
EN
My Friends
This list contains all the existing connected friends that are allowed to send photos
to your frame.
Change options for a friend.
Use this section to set a friend's permission on your photo frame. Click the options
icon
to open the 'Friend Settings' menu. Within this, you can decide whether or
not to share the code to the f rame. If this is enabled, the friend can retrieve your
frame code and share the code to the frame from their Frameo app with other
friends.
Under 'Friend Settings', you can delete a friend and remove them from the list. To
do so, tap 'Delete a friend'. You will then be asked to confirm the removal of the
friend selected. You will be also asked if you would like to remove all photos/videos
received from this friend. Once removed this specific friend will no longer have
permission to send photos to your frame.
Add person.
To allow a new person to send you photos and connect with your friend, simply tap
the 'Add friend' button
and share the code displayed on the screen with your
friend using any of your preferred communication channels (e.g. call, text message).
Display
Brightness Level
Adjust the brightness level of the screen.
Sleep Mode
ClickID Snap 10 Photo Frame has a Sleep Mode feature which you can use to turns
off the screen and reduce the power consumption.
The default setting of the ClickID Snap 10 photo frame is to automatically turn off
the screen at 23:00 and
turn back on again at 07:00. To change this, you can set the sleep mode start/end
time as per your preferences.
Please note: While in Sleep Mode, your frame will still receive photos as it is not
Powered OFF or set to Standby.
16