Magerit Metro Manual De Instrucciones página 18

SEQUENCER menu
Here, you configure the various rhythmic patterns for each channel. Since there are 6 channels (or slots),
there are 6 completely independent patterns. However, they all share the same BPM TEMPO.
Magerit METRO features two types of sequencers: step and Euclidean. We'll see how each one works. To
switch between both types of sequencers, hold down the
Press briefly to pause or play the
The external clock plays the sequences following the rhythm set by the input signal from any other Euro-
rack module. If that signal is paused, METRO will detect it.
STEP SEQUENCER
Comprising grids of adjustable length and selectable steps. That is, in each channel, you can select a
different sequence length and pattern.
Turn the encoder to move horizontally along the grid. To move vertically, press and hold it, then rotate it.
To add or remove a pulse on the step where the cursor is positioned, briefly press the encoder.
When you rotate the encoder, a small window will appear in the foreground indicating the BPM, the cu-
rrent and maximum step of the current sequence, and the ratio.
The cursor is on step 2.
Sequence 1 has a maximum
of 8 steps
The tempo is adjusted with potentiometer 2( )
sequence.
Cursor
button for more than 3 seconds.
1
2
3
Channel 4 paused
5
6
1
2
3
Ratio of sequence 1
5
6
Global BPM of the sequencer
18