Magerit Metro Manual De Instrucciones página 22

MIXER menu (+EFFECTS)
Holding down the encoder button from any window will access this menu. Each bar shows the volume
and panning of each channel.
Press the encoder (or press and
without releasing it, then rotate it)
to toggle between editing volume
and panning. The dot indicates
what the potentiometers will edit.
Pressing (or pressing + rotating) the encoder will take you to the effects window. With the same action,
you can select any effect. Simply rotate the encoder to modify its value.
Low-Fi lowers the resolution of the final mix from 16 bits to 5 bits.
•
Overdrive saturates the mix. The volume may increase.
•
Echo applies an echo effect.
•
Reverb applies reverb to the entire mix.
•
potentiometer will act as an attenuator for these effects.
Upon exiting the MIXER menu, all parameters will be saved automatically.
1 2 3 4 5
48
2
3 4
1
Low-Fi 16bits
Overdrive !!
Echo
Reverb
FX: 90%
6
5
In this screen (volume and
panning editing only), po-
tentiometer
6
channel 6.
12% The exclamation marks next
to Overdrive (!!) warn of the
0%
potential increase in the total
65%
volume of the mix.
22
will control