Magerit Metro Manual De Instrucciones página 23

Firmware update
To update METRO you need to have a USB cable and the Magerit Updater, for Windows and Mac:
https://magerit.es/downloads
Turn off your Eurorack system and connect the USB cable to the module and the computer (Windows or Mac). Then
turn on the rack. When you open the Magerit Updater the module will appear in the serial ports list. If not, click
on the refresh button.
To know the version installed in yor METRO, turn off and on the module and you will see it under the Magerit logo.
Factory reset
If you press and hold
menu. Press to wipe all data or select
The wiping process can't be undone!
and buttons and then turn on the module, you will enter to the Factory Reset
to cancel the restoring process. Then, METRO will restart.
Magerit
23