Publicidad
Idiomas disponibles
Idiomas disponibles
50
Common function quick setting instruction
Function
Operation
Item
Short press:
AUTO
CLOSE
Short press:
Force
Adjustment
Long press the
button for 6
econds ：
Running
Cycle
Counter
Inquiry
Description
Important:
The "AUTO CLOSE" only can be activated when the Photo beam or
light curtain has been correctly installed and the photo beam
function has been enabled from function menu (Refer to page 21 -
Menu 5).
- Short press the "AUTO CLOSE" button, when the indicator light is
turned on. It means the "AUTO CLOSE" function has been activated.
(Default: The door only can auto close while in the open limit
position. And the Auto Close time is 15 seconds).
Note: Refer to page 16 - Menu 4 to change any setting for AUTO
CLOSE conditions or time if necessary.
Note: If there is no any photo beam or light curtain installed, the
door can not be closed, and the LED display will show the letter
"E6" as an indication.
- Short press the "AUTO CLOSE" button, when the indicator light is
turned o . It means the "AUTO CLOSE" function has been dis-acti-
vated.
- Short press the button, the digital display will indicate the
current force level rstly.
- Continually short press the button: Incremental rolling.
display the force level between
L1: Minimum force level.
L9: Maximum force level.
Note: L3 to L7 is recommended.
- The digital will rolling display
It represents the drive has
been 10 running cycles worked.
Note: The running cycles is displayed in 6 digits
to
Opening your life
5
Publicidad
