Publicidad
Idiomas disponibles
Idiomas disponibles
50
PB2
Port
function
setting (NO)
- Execute CLOSE the door at the
open limit position.
- OPEN the door at the close limit
position.
- ONLY OPEN the door in the
middle of the travel limit.
Execute ONLY OPEN the door
(Speci ed application scenarios,
Fire alarm, infrared sensor to open
the door)
Execute PARTIAL
door
Execute REVERSE closing (default)
during door
Remark ：
Execute REVERSE
closing (default) during door
- Press and hold SET button for
about 6 seconds to enter main
menu until "0.-" appears on the
display then release the button.
- Press "+" till "6.-" appears on the
display.
- Press SET then appears "6.0" on
the display
- Press "+" till "6.2" appears on the
display.
Press SET enter into the PB2 Port
function setting.
Opening your life
OPEN
the
1 24
Publicidad
