Publicidad
Idiomas disponibles
Idiomas disponibles
50
PB1 Port funtion
setting (NO)
- Adjust the stalls
to
by buttons+/-. (9 stalls
represent 10%-90% of the door
travel limit)
- Press SET to con rm and exit to
the menu.
You can continue to set the next
function
RETURN button to exit the
function setting.
Remark:
(default).
It means that the partial open
door position is 50% of the full
travel limit.
Press and hold SET button for
about 6 seconds to enter main
menu until "0.-" appears on the
display then
release the button.
- Press "+" till "6.-" appears on the
display.
- Press SET then appears "6.0" on
the display
- Press "+" till "6.1" appears on the
display.
- Press SET enter into the PB1 Port
function setting.
Execute OPEN-STOP-CLOSE the
door... Single-cycle function
Opening your life
from
menu. Or press the
1 23
Publicidad
