Accessmatic KONG50 Manual De Usuario página 58

50
Function menu description
MENU 0 Travel Limit Setting
Press and hold SET button for about
6 seconds to enter travel limit setting
until "0.-" appears on the display then
release the button.
- Press SET to enter travel limit
setting
menu, the digital displays
now you can set the OPEN Position
Limit.
- Click the button UP/DOWN to
adjust the open limit position of the
door. Click the SET button to
con rm the open limit position.
- Digital now
automatically,
set the CLOSE position limit.
- Click the button UP/DOWN, to
adjust the close position limit. Click
the SET button to con rm.
- Then the door drive would automa-
tically open and close the door and
save the setting.
PS: If there is a faulty
check if the encoder cable is
connected properly. If the connec-
tion is normal, please reset the
travel limit. When you reset the
travel limit, short click the UP
/DOWN button and then reset the
travel limit.
Opening your life
displays
now you can
, please
1 9