KRHÜNER 60560 Manual De Instrucciones página 12

FUNCTIONS
A. SPEED bu� on
B. MODE bu� on
C. TIMER bu� on
D. SWING bu� on
E. POWER ON/OFF bu� on
1. Switch on the appliance by
pressing the ON/OFF bu� on (E) on the control panel. The fan starts to work at
speed 1. The display screen will light up number 1 in blue color.
2. To change speed, press the SPEED bu� on (A) several � mes. The speed will change
with each bu� on stroke. The display screen will light up circulate of speed number
1-2-3.
3. For oscilla� on, press the SWING bu� on (D). the fan starts oscilla� ng. To stop
oscilla� on, press bu� on (E) once again.
4. Your fan has a � mer func� on. A� er having switched the unit on, press the
TIMER bu� on (C) and the fan will operate for as long as you choose: Press the
� mer bu� on several � mes and the se� ng will change with every bu� on stroke.
The display screen will light up in accordingly. When the set � me has elapsed,
the fan switches off automa� cally. The fan can set the � mer func� on from
1-2-3-4-5-6-7hours, as specifi ed by the sum of the numbers that are lit.
5. The air fl ow can be adjusted by � l� ng the en� re motor unit upward or downward.
6. To switch the fan off , press the ON/OFF bu� on (E).
7. Always unplug the appliance when it is not used.
Warning: The fan can only be used if properly assembled in good condi� on.
REMOTE CONTROLLER USE
• The fan func� ons are operated with both the keypad of the control panel and the
remote control which must be pointed at the front (maximum distance of about 4m)
towards the control panel; for the fi rst use take off the tab transparent plas� c of the
ba� ery 's side.
• Ensure ba� eries are inserted in the correct direc� on.
• Do not mix ba� ery types.
• When replacing, ensure both ba� eries are changed simultaneously.
• 2xAAA size ba� eries are required (not included).