Installation Of The Chair The Car - JANE iMATRIX Manual De Instrucciones

E. INSTALLATION OF THE CHAIR IN THE CAR
Your iMATRIX has been designed to be installed in your car together with
the iPLATFORM from Jané. (Accessory not included)
Before installing the safety seat with the ISOfix anchors, make sure that
the seat on which you are going to install it is i-Size or that it is fitted with
the ISOfix system and that your car is included in the list of compatible
vehicles.
(Read your vehicle instruction manual, it will state which seats are com-
patible with the platform).
Set the backrest to position R4 (baby sitting up).
Adjust the headrest to position C1. If the headrest is in position C2, press
the side buttons simultaneously and move the headrest to C1.
Coloque el protector de cabeza en la posición indicada (sólo para ni-
ños de 40 a 60cm).
For children from 40 to 60 cm
1- Set the headrest to position C1.
2- Place the cushion insert in the correct position.
3- Place the iMatrix handle to position 3 CAR, make sure that it is locked
in place, and that the car symbol is fully displayed.
4
.a
4 .b
4 .b
5 .b
For children from 60 to 83cm
1- Set the headrest to position C2.
2- Remove the cushion insert.
3- Place the iMatrix handle to position 3 CAR, make sure that it is locked
in place, and that the car symbol is fully displayed.
4 .b
EN
45