Zendure SuperCharged Hyper 2000 Manual Del Usuario página 5

7. Do not put fingers or hands into the product.
8. For safety purposes, please use only the original charger and cables designed for the equipment. We are
not liable for damage caused by third party equipment, and this may render your warranty invalid.
9. Keep a distance of 50mm between the Hyper 2000 hybrid inverter and other objects.
10. During the operation of the solar energy system, avoid direct sunlight to prevent the Hyper 2000 hybrid
inverter from overheating. Do not place the Hyper 2000 hybrid inverter near any heat source.
11. Please install the product according to our user manual to avoid damage to the product or injury to other
people.
12. Do not use this product near strong static electricity or strong magnetic fields.
13. Do not place the equipment in an environment with flammable or explosive compounds, gas, or smoke.
Since the Hyper 2000 hybrid inverter relies on the shell to dissipate heat, exposing the enclosure to
excessive heat will lead to damage.
14. To reduce the risk of damage to the electric cords and connectors, pull the connectors rather than the cord
when disconnecting the product.
15. Do not use the product in excess of its output rating. Overloads may result in a risk of fire or injury to
persons.
16. Do not use any products or accessories that are damaged or modified. Damaged or modified batteries may
exhibit unpredictable behavior resulting in fire, explosion, or risk of injury.
17. Do not operate the product with a damaged cord or plug, or a damaged output cable.
18. Do not disassemble the product. Take it to a qualified service person when service or repair is required.
Incorrect handling may result in a risk of fire or electric shock.
19. Do not expose the product to fire or high temperatures.
20. Do not attempt to replace the internal components of the equipment by any unauthorized personnel. Have
servicing performed by a qualified repair person using only identical replacement parts. This will ensure
that the safety of the product is maintained.
21. The Hyper 2000 hybrid inverter has a protection level of IP65, so the product cannot be immersed in liquids.
If the product accidentally falls into water during use, please place it in a safe and open area and stay
away from it until it is completely dry. The dried product should not be used again and should be properly
disposed of according to the disposal guidelines in this manual.
22. The product may feel warm when it's working. This is a normal operating condition and should not be a
cause for concern.
23. To reduce the risk of electric shock, disconnect the solar photovoltaic panels, batteries, and home grid
before attempting any instructed servicing.
24. When charging the battery, work in a well-ventilated area and do not restrict ventilation in any way, as
inadequate ventilation may cause permanent damage to the equipment.
25. Do not clean the product with harmful chemicals or detergents. Only clean it with a dry cloth.
26. Do not move or shake the unit while operating as vibrations and sudden impacts may lead to poor
connections to the hardware inside.
27. Ensure that the Hyper 2000 hybrid inverter and the batteries are installed securely to avoid accidents and
product damage caused by falling.
28. In case of a fire, only a dry powder fire extinguisher is suitable for this product.
29. Servicing of batteries should be performed or supervised by personnel knowledgeable about batteries and
the required precautions.
EN
2