Kesser K-K2000W Manual De Instrucciones página 15

15
The position marked with the "T" is a timer override position. The timer continues to work, but
the heater is continuously powered. As a result, the heating can be switched on at any time
if necessary.
In the position marked with the "O", the timer continues to work, but the heater is not supplied
with power.
Make sure the timer slider is in the middle position next to the clock icon.
Rotate the outer ring of the timer clockwise until the current time is aligned with the arrow
pointer, that is, if the time at which the timer is set is 20 PM, rotate the outer ring until the
number 20 is in line with the arrow pointer.
Set the operating time that the heater needs by pulling the segments around the outer ring
forward according to the required operating times.
When set up, the heating works every day at fixed times. Please note that the heater should
always be plugged into a power outlet, the switches on the item should be in the "On"
position, and the thermostat should be set accordingly to ensure that the heater is turned on.
If the heater needs to be operated constantly, the timer slider should be set to the "T" position.
If it is later necessary to return to the operation of the timer, the timer slide switch must be set
to the center position (clock).
Note: When used in timer mode, due account should be taken of the fact that the heating
can be turned on unattended.
www.eshopping.de
Hergestellt für Dilaw Warehouse GmbH // Fuggerstraße 15a // 48165 Münster // Germany