Publicidad
NAMES AND FUNCTIONS OF PARTS
1.
10.
11.
®
REMOTE switch
Set to ON
when
operating
with the
wireless remote transmitter.
REMOTE indicator
When lit, indicates set is able to receive
wireless remote signals.
SELECTION MODE indicator
Lit indicator corresponds to the mode
selection on the preamplifier.
MUTING indicator
When
lit, indicates
system
output
is
muted to 1/10 of normal output volume.
MUTING switch
This reduces the output volume to one-
tenth without impairing sound quality.
POWER SUPPLY button
Push in to turn the unit on.
COMMAND CHECKER
Lights up when receiving signals from
the wireless transmitter.
SELECTOR buttons
For
manual
selection
of the
sound
source.
VOLUME knob
For manual adjustment of volume.
PHONO jacks
Connect cables from here to the TAPE
REC jacks on the preamplifier or receiver.
(Do not connect turntable's output plugs
directly to these jacks.)
TUNER jacks
Connect
cables
from
here to tuner's
OUTPUT jacks or receiver's TUNER OUT
jacks.
12.
13.
14.
15.
16.
17.
18.
19.
REMOTE jack (Turntable)
Connect cable from here to turntable's
REMOTE jack.
REMOTE jack (Tuner, Receiver)
Connect
cable
from
here
to tuner
or
receivers REMOTE jack.
AUX jacks (AUX)
Connect cables from here to the output
jack on auxiliary component.
TAPE PLAY jacks
Connect cables from here to LINE OUT/
PLAY jacks on the tape deck.
TAPE REC jacks
Connect
cables
from
here
to
LINE
IN/REC jacks on the tape deck.
OUTPUT jacks
Connect cables from here to TAPE PLAY
jacks on preamplifier.
REMOTE jack (Deck)
Connect cable from here to the REMOTE
jack on the deck.
AC outlets
Connect AC power cords from two com-
ponents
which
will
be
operated
by
remote control.
Publicidad
