Publicidad
Idiomas disponibles
Idiomas disponibles
2.2
Hazardous dust
WARNING
Hazardous materials.
Vacuuming up hazardous
materials can lead to seri-
ous or even fatal injuries.
The following materials
must not be picked up by
the machine:
• hot materials (burning
cigarettes, hot ash, etc.)
• flammable, explosive,
aggressive liquids (e.g.
petrol, solvents, acids,
alkalis, etc.)
• flammable, explosive
dust (e.g. magnesium or
aluminium dust, etc.)
CAUTION
Materials picked up can present a hazard to
the environment.
•
Dispose the dirt in accordance with legal
regulations.
In the case of asbestos abatement wear additional
single-use clothing. Wear a P2 breathing mask. Be-
fore removing the machine from the area contami-
nated with harmful substances:
•
Clean the outside of the machine, wipe it
clean or pack the machine in well-sealed
packaging and avoid spreading deposited
harmful dust.
During maintenance and repair work all contami-
nated parts that could not be cleaned satisfactorily
must be:
•
Packed in well-sealed bags
•
Disposed of in a manner that complies with
valid regulations for such waste removal.
2.3
Spare parts and accessories
CAUTION
Spare parts and accessories.
The use of non-genuine spare parts, brushes
and accessories can impair the safety and or
function of the appliance.
Only use original spare parts and accessories from
Berner. Spare parts that can affect health and safety
of the operator and or function of the appliance, are
specified below:
OEL=Occupational Exposure Limit,
1)
Original instruction
Filter element Ø185 x 140 PET
L-Class
Filter bag set
2.4
3
3.1
Check that the electrical switch is switched off (in po-
sition 0). Check that suitable filter are installed in the
machine.Then connect the suction hose into the suc-
tion inlet at the machine by pushing the hose forward
until it fits firmly in place at the inlet. Then connect
the tubes with the hose handle, twist the tubes in
order to ensure that they are properly fitted. Attach
suitable nozzle to the tube. Choose nozzle depend-
ing on what type of material that is to be picked-up.
If used for dust extraction in connection
with dust producing tool then connect end of suction
hose with appropriate adapter. Connect the plug into
a proper electrical outlet. Put the electrical switch
into position I in order to start the motor.
3.2
Optional accessories / Option depending on model
*)
Description
In explosive or inflammable atmosphere
CAUTION
This machine is not suitable for use in explo-
sive or inflammable atmospheres or where
such atmospheres are likely to be produced
by the presence of volatile liquid or inflamma-
ble gas or vapour.
Control / Operation
CAUTION
Damage due to unsuitable mains voltage.
The appliance can be damaged as a result of
being connected to an unsuitable mains volt-
age.
•
Ensure that the voltage shown on the rat-
ing plate corresponds to the voltage of the
local mains power supply.
Starting and operating of the machine
Turn I: Activate the machine –
turn clock wise for speed control
Turn 0: Stop the machine
Turn
: Activate Auto-On/Off
operation – turn counterclockwise
for speed control.
Auto-On/Off socket outlet for power tools
CAUTION
Appliance socket
* )
The appliance socket is designed for electri-
cal auxiliary equipment; see technical data for
reference.
•
Prior to plugging in an appliance, always
switch off the machine and the appliance
that is to be connected.
•
Read the operating instructions to the ap-
pliance to be connected and observe the
safety notes contained in these.
Order No.
94314
94315
5
Publicidad
