Descargar Imprimir esta página

Hoover HFX Manual De Usuario página 11

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 62
7. ERROR CODES & TROUBLE SHOOTING
The following is a list of error codes & solutions that your product will identify and indicate on your LED
display should you product encounter problems:
ERROR
CODE
E0 indicates handheld or main body is not in the right postion.
Check if the handheld and the main body are assebled
Check if there is any obstruction in the nozzle.
Go to section 7.1 and carry out ALL maintenance requirements.
Switch off your product and wait for 20 mins, then restart it.
If the problem persists there is a technical issue on the motor,
please contact your local Hoover service centre.
Remove the battery from your product and contact your local
Check if nozzle window is correctly assembled, or main body is
Make sure the nozzle window is in place correctly. Press the
Switch off your product and wait for 20 mins, then restart it.
If the product still does not work, contact your local Hoover
E5 indicates there is a blockage in your product.
Go to section 7 and carry out ALL maintenance requirements.
Empty the bin, clean the filters, clean the nozzle and brushbar
There is a technical issue in the main vacuum.
Stop using your product and contact your local Hoover service
Please ensure you are using a genuine HOOVER charger.
If the problem persists, stop using your product and contact
There is a technical issue in the main vacuum.
If the problem persists, stop using your product and contact
E9 indicates there is a blockage in the mini power nozzle.
Go to section 7.4 and perform the indicated maintenance task.
FAULT & SOLUTION
correctly.
There is a technical issue in the battery pack.
Hoover service centre.
in the right position.
window down gently to click it in securely.
Check if the main body is assebled correctly.
There is a technical issue in the main nozzle.
Switch off your product and wait for 20mins.
service centre.
and check for blockages.
centre.
There is a technical issue in the charger.
your local Hoover service centre.
Switch off your product and wait for 20mins.
your local Hoover service centre.
11
GB

Publicidad

loading