Hoover HFX Manual De Usuario página 4

GB
3. CHARGING THE BATTERY
The battery in your product does not come fully charged.
Before first use, please charge it completely: this should take around 3.5 hours.
NOTE: Use only the charger supplied with your cleaner to recharge. It is normal for the charger to
become warm to touch when charging.
For your convenience, the battery can be charged in 2 different conditions.
1. With the product fully assembled in stick mode or located in the wall mount, the battery status will
be indicated on the LED display.
2. Remove the battery from the product by pressing the battery release buttons and taking out the
battery package in parallel. With the battery removed from the product, the battery pack LED will flash
white when charging and turn WHITE when fully charged.
1 2
BATTERY LEVEL:
When using your product, the real time charge
level of your battery is indicated on the LED
display located on the handheld.
Blinking
When the remaining run time is reduced to 2 mins,
the battery icon on the LED display will begin to
blink.
It is recommended you switch off your product and
recharge the battery.
LED DISPLAY
This cleaner is equipped with a LED display.
When the product is ON, the LED display shows
working mode, maintenance, error, battery status
information.
4