American Standard Aspirations 8888116 Manual Del Propietário página 6

6
INSTALL TUB SPOUT
• While pressing the two BUTTONS (3) on the underside of the tub spout, push WATERFALL TUB
SPOUT (1) over ALIGNMENT PINS (2). With the tub spout pushed firmly against the wall plate, release
the two buttons and ensure that the spout is secure.
• Tighten the two SET SCREWS (5) and install the PLUG BUTTONS (4) on the underside of the spout.
4
7
TEST INSTALLED FITTING
• Turn on the valve and check the tub spout
for leaks.
• Press DIVERTER BUTTON (1) to divert
water to the shower head and check for
leaks.
Note: To divert water from the shower back
to the tub, the main shower valve must be
turned off.
8
CARE INSTRUCTIONS
DO: SIMPLY RINSE THE PRODUCT CLEAN WITH CLEAR WATER. DRY WITH A SOFT COTTON FLANNEL
CLOTH.
DO NOT: DO NOT CLEAN THE PRODUCT WITH SOAPS, ACID, POLISH, ABRASIVES, HARSH CLEANERS,
OR A CLOTH WITH A COARSE SURFACE.
5
3