ENG
AENO™ Electric Smart Kettle is designed to heat and boil drinking water.
Model
AEK0007S
Color
Black
Plug type
E/F
Technical Specifications
Input parameters: 220–240 V (AC), 50–60 Hz, 8.7 A, 1,850.0–2,200.0 W. Wi-Fi
frequency: 2.4 GHz. Transmit power: +20 dBm / 100 mW. Usable volume: 1.7 L.
Boiling time: up to 6 min. Control: manual, remote (AENO application, voice
assistants). Modes: manual control – boiling, heating while maintaining the
selected temperature (+40 °C, +55 °C, +80 °C, +90 °C) up to 24 hours; control via
the application – boiling, heating while maintaining the selected temperature
(+40...+99 °C) up to 24 hours. Dimensions (L×W×H): 212×162.3×262 mm. Boiling
chamber material: stainless steel. Length of power cord: 0.75 m. Operating and
storage conditions: temperature 0...+40 °C, RH 30–80 % (non-condensing).
Scope of Supply
AENO™ Electric Smart Kettle, stand, Quick Start Guide.
Device elements and accessories (see Figure)
1 – lid, 2 – button to open the lid, 3 – handle, 4 – stand, 5 – plug, 6 – button
("Start/Stop"), 7 – button
8 – temperature maintenance indicator, 9 – boiling indicator, 10 – display.
Limitations and Warnings
Please read this document carefully before using the device. The kettle is
intended for domestic use only and may not be used outdoors. This device is
not intended for use by children under the age of 14 or by persons with reduced
physical, mental or intellectual abilities unless they have sufficient experience
and knowledge of how to use the device and are supervised by a person
responsible for their safety. Before use, make sure that the rated voltage and
If you have any questions or difficulties in using your AENO device, please
contact support by e-mail at support@aeno.com or online chat at
aeno.com/service-and-warranty. The specialists will help you solve the
problem, and you will not have to waste time and effort visiting the store.
6
AEK0007S-UK
Black
G
(selection and maintenance of temperature),
AEK0008S
AEK0008S-UK
White
White
E/F
G
aeno.com/documents