AENO EK7S Guia De Inicio Rapido página 9

Operation of the Device
1. Open the lid and pour the desired amount of water into the kettle.
Note. Do not pour water below the "MIN" mark and above the "MAX" mark on
the inside of the housing.
2. Close the lid tightly and place the kettle on the stand.
 Boiling. Follow steps 6–7 in the "Preparing for the First Use" section.
 Boiling while maintaining the selected temperature. Tap
then use
water up to 100 °C and enters the temperature maintenance mode for
24 hours.
 Heating while maintaining the selected temperature. Tap
select the required temperature: the kettle will heat water to the selected
temperature and maintain it for 24 hours.
Note. This mode does not involve boiling water.
Note. Tap button again to interrupt boiling or heating with maintenance.
Boiling or heating will also immediately and automatically turn off when the
kettle is removed from the stand, temperature maintenance will turn off
3 minutes after the kettle is removed from the stand.
Remote control
Note. It is recommended to stay as close as possible to the kettle and, if
possible, to the Wi-Fi router while the device is connected to the application.
1. Pour the right amount of water into the kettle. Close the lid tightly and place
the kettle on the stand. Insert the plug into the socket.
2. Connect your smartphone to a Wi-Fi network (2.4 GHz).
3. Download the AENO mobile application from Google Play or App Store and
register a new account or log in to your user account.
4. On the main screen of the application, tap "Add Device". If you have devices
already connected to the application, tap the "+" in the upper right corner
and select "Add Device".
Note. If you receive system prompts to turn on assistive features on your
smartphone, follow the prompts.
5. In the window that opens, select the "Kettle" category.
aeno.com/documents
button to select the required temperature: the kettle heats
button and
button to
9