Sony YS-SX509P Manual De Instrucciones página 44

Menu Setting Mode
(VIDEO LOSS SET) menu
VIDEO LOSS (Default setting: OFF)
You can set the action to take when there is an
interruption in the video signal feed.
OFF: The video loss will not be active independently
of the setting entered for each camera.
INDIV.: The ON/OFF setting will be as set for each
of the cameras.
Note
If the "INDIV." setting is used, in the (CAMERA
SET) menu, enter the desired setting for each camera
(see page 47 (GB)).
DISPLAY (Default setting: FREEZE)
FREEZE: When there is a video loss, the image just
previous to the interruption is frozen on-screen.
TEST: When there is a video loss, test chart is
displayed on-screen.
Notes
• The "DISPLAY" setting is available only when
"MULTI MODE" in the (MONITOR SET) menu
has been set to "ON".
If the "MULTI MODE" has been set to "OFF", the
"VIDEO LOSS" is displayed on the test chart.
• Depending on the timing of the video loss, a
complete picture may not be displayed.
• Even if a still image is selected for the monitor
display, test chart only can be recorded.
DATA (Default setting: ON)
ON: The video losses data is recorded as alarm data.
OFF: The video losses data is not recorded.
Note
If the "ON" setting is used, you can review the video
losses data (camera number, date, time) in the
(ALARM DATA) menu (see page 56 (GB)).
44
(GB)