Makita TW009G Manual De Instrucciones página 5

ENGLISH (Original instructions)
SPECIFICATIONS
Model:
Fastening capacities
Square drive
No load speed (RPM)
Impacts per minute
Max. fastening torque
(at max impact mode (4) )
Nut-Busting torque
(at max impact mode (4) )
Overall length
Rated voltage
Net weight
• Due to our continuing program of research and development, the specifications herein are subject to change
without notice.
• Specifications may differ from country to country.
• The weight may differ depending on the attachment(s), including the battery cartridge. The lightest and heavi-
est combinations, according to EPTA-Procedure 01/2014, are shown in the table.
Applicable battery cartridge and charger
Battery cartridge
Charger
• Some of the battery cartridges and chargers listed above may not be available depending on your region of
residence.
WARNING:
Only use the battery cartridges and chargers listed above. Use of any other battery cartridges
and chargers may cause injury and/or fire.
Intended use
The tool is intended for fastening bolts and nuts.
Noise
The typical A-weighted noise level determined accord-
ing to EN62841-2-2:
Model TW009G
Sound pressure level (L
Sound power level (L ) : 109 dB (A)
WA
Uncertainty (K) : 3 dB (A)
Model TW010G
Sound pressure level (L
Sound power level (L ) : 111 dB (A)
WA
Standard bolt
High tensile bolt
Max impact mode (4)
Hard impact mode (3)
Medium impact mode (2)
Soft impact mode (1)
Max impact mode (4)
Hard impact mode (3)
Medium impact mode (2)
Soft impact mode (1)
Fastening with M36 for 6
seconds
Fastening with M36 for 3
seconds
) : 101 dB (A)
pA
) : 103 dB(A)
pA
TW009G
435 mm
D.C. 36 V - 40 V max
10.8 - 11.8 kg
BL4040 / BL4040F* / BL4050F* / BL4080F*
* : Recommended battery
DC40RA / DC40RB / DC40RC / DC40WA
Uncertainty (K) : 3 dB(A)
NOTE: The declared noise emission value(s) has
been measured in accordance with a standard test
method and may be used for comparing one tool with
another.
NOTE: The declared noise emission value(s)
may also be used in a preliminary assessment of
exposure.
5 ENGLISH
TW010G
M27 - M45
M20 - M33
25.4 mm
-1
0 - 1,200 min
-1
0 - 850 min
-1
0 - 700 min
-1
0 - 600 min
-1
0 - 1,750 min
-1
0 - 1,500 min
-1
0 - 1,300 min
-1
0 - 1,200 min
3,150 N·m
2,850 N·m
4,000 N·m
570 mm
11.8 - 12.8 kg