Publicidad
Idiomas disponibles
Idiomas disponibles
ASSEMBLY INSTRUCTIONS
Step 1
Place the Top Panel (B) on a non-abrasive
B
surface with the holes facing up. Using a
H
H
Phillips Screwdriver insert 4 each Cam
Top Panel
Screws (H) in each of the holes provided.
Place the Bottom Shelf down on a non-
abrasive surface with the holes facing up.
Insert 4 each Cam Locks (I) into the hole
positions as shown on the drawing. When
C
I
I
inserting the cam lock, make sure that the
Bottom Shelf
arrow is facing the cam screw entry.
Step 2
H
Place the Left and Right Side Panels (A)
down on a non-abrasive surface with the
holes facing up. Using a Phillips
Screwdriver, insert 2 each Cam Screws
(H) into the positions shown on each of
K
the panels.
A
Left/Right Side Panel
Insert 2 each Cam Locks (I) into the
I
positions shown on the Left and Right
Side Panels (A). When inserting the cam
lock, make sure that the arrow is facing
the cam screw entry.
Insert 4 each Wooden Dowels (K) into the
positions shown on the Left and Right
Side Panels (A).
LLR36420/60065 (42")_LLR36480/60066 (48")_030206
Page 3 of 15
Publicidad
