Publicidad
Idiomas disponibles
Idiomas disponibles
NAMES OF PARTS AND THEIR FUNCTIONS
Main unit front panel
Power unit
1 Power indicator
Turns orange when Power is ON.
2 Power indicator
Indicates Power status.
Lighted orange: ON (unit can be operated).
Lighted red: Standby (unit is in standby mode).
3 INPUT SELECTOR
Rotate to change the input device.
4 Remote control sensor
To operate the remote control, point it here from a
distance of about 7 meters (23 ft.) or less.
5 VOLUME dial
Adjusts the sound volume.
Rotate clockwise to raise the volume; rotate
counterclockwise to lower the volume.
6 Operating keys
Use to operate the unit.
MENU button
Use to select the setting menu. When the button is
pressed, the setting mode changes. (page 16)
EXIT button
Press to confirm selected settings.
10
Main unit
1
3
INPUT SELECTOR
MENU
EXIT
DISP
2
Power switch
Use to switch between ON and Standby modes.
DISP button
When pressed, the display status alternates between
Lighted (normal status) Not lighted (off) Lighted
(normal status). Whenever power is switched ON, the
display appears with the status last selected before the
power was turned off.
+/− buttons
Press to select setting values.
FINE button
Use to change the sound volume adjustment in
increments of 1 or 0.5 step.
MUTE button
Press to temporarily mute the audio playback.
CAUTION
You must unplug the power cord (disconnect device) to
stop the power supply completely. Please locate the unit
near the electrical outlet so that you can easily access
the power plug (disconnect device).
4
5
VOLUME
+
FINE
MUTE
6
Publicidad
