Control Panel; On/Off Switch - WMF KULT pro Power Instrucciones De Uso

Control panel

on/off switch

To use the appliance, you must first turn the on/off switch to the on position
(Pos. I). You can then select automatic programmes, use the Pulse function or
the speed controller.
Speed controller
You can use the speed controller to infinitely adjust the speed of the high-
performance motor between min and max.
For this, switch the appliance on using the on/off button (Pos. I) and select
the desired speed with the speed regulator.
When you have finished blending, turn the speed controller back to the home
position (see image) and then switch the on/off button off again (Pos.
Pulse function
The motor runs at maximum speed as long as the PULSE button is held down.
This is particularly useful for a final mix before pouring.
Programme buttons
In order to carry out common tasks with the Smoothie Blender, the appliance
has three automatic programmes for smoothies, sauces and frozen foods.
Smoothie
The Smoothie button can be used for preparing green smoothies easily.
Switch on the appliance using the On/Off switch (Pos. I). Now press the
Smoothie button, and the blender will start an automatic programme with
different speeds.
The programme ends automatically. You can stop the programme at any time
by pressing the Smoothie button again or moving the On/Off switch to off
(Pos.
Example recipe: "Green Smoothie with pear and salad"
Ingredients:
4 handfuls lamb's lettuce
1 celery stalks
1 fennel bulb
½ cucumber
1 avocado with seed
1 avocado without seed
1 pear
1 lemon slice
1 large piece of turmeric
approx 700 ml water
Preparation:
▪ Wash the lamb's lettuce, celery stalks and cucumber. Peel the avocados,
cut the cucumbers and celery into quarters and add to the jug together
with lamb's lettuce and approx 300 ml water. Tip: If you add ice cubes
or crushed ice to the jug instead of half of the water it will make the
Smoothie cooler.
Close jug with the lid.
14
).
).