Technoline WT 477 Manual De Instrucciones página 19


Press the
"24Hr"  "12Hr". The LED of the PM indicator will appear to indicate
the afternoon time in the 12Hr time format. There is no AM indicator.

Press the
button to set the snooze duration (from 5 min to 60 min.).

Press the
Notes:

The clock exits the set mode when no key is pressed in approximate
10 seconds.

Press and hold the
speed.
TO SET ALARM 1 AND ALARM 2 (default alarm time at 6:00)

(1) Press and hold the
press the

(2) Press the
Press the

Press the
Repeat Step 1 to 2 above to set Alarm 2.

In the middle of setting the alarm, press the
your alarm setting and exit the alarm set mode.
Notes:

The clock exits the alarm set mode when no key is pressed in
approximate 10 seconds.

Press and hold the
speed.
TO TURN ON OR OFF ALARM 1 AND 2

Press the

Press the

Press the
LED and
button once again, press the
button once again, "n05" flashes, press the
button again to confirm. The set time is displayed.
or the
or the button to set the desired hour.
button once again, the minute digits "00" flash.
or the button to set desired minutes.
button once again, the
or the
button once to activate Alarm 1, the
button again to activate Alarm 2,
button again to activate both Alarm 1 and 2. Both
LED appear.
button to accelerate setting at high
LED and hour digit "6" flash,
button, the
LED and hour digit "6" flash.
button to accelerate setting at high
EN7
or the button to select
button once to store
LED appears.
LED appears.
or the