UNIPRODO UNI GT 02 Manual De Instrucciones página 46

In the vicinity of the control panel on the side there is a speed control
knob of the device:
The knob adjusts the speed of the cart when it is not being controlled
via remote, i.e., when the user follows behind the trolley and controls
it.
IMPORTANT: In this mode, never turn the knob to set the cart in
motion unless you are ready to move with it yourself.
• In this mode, the device can only move forward.
• In this scenario, the remote control can only be used to stop the
cart (see description below).
• To increase the speed of travel, turn the knob clockwise, and by
turning it counterclockwise, reduce the speed. When turning the
knob to reduce speed, upon reaching the end of the adjustment
range, i.e., upon encountering resistance, the cart will come to a
halt.
• To stop the trolley, press the power button on the control panel.
Alternatively, this can be done by pressing the "STOP" button on
the remote control.
3.3.6 Remote control
EN