UNIPRODO UNI GT 02 Manual De Instrucciones página 49

3.3.7 Pairing the remote control with the trolley
Ensure that the cart's battery is functional, charged, and connected,
and that the cart itself is switched on (indicated by a green light on
the control panel). Similarly, ensure that the remote control has
working batteries and is switched on (signaled by a flashing blue light
when any of its buttons are pressed). If all these conditions are met,
but the trolley still does not respond to the remote control, they
should be re-paired as follows:
• Turn on the power to the trolley, then on its control panel press
and hold the "T" button for 5 seconds until the green power light
starts flashing.
• Switch on the remote control and proceed to press any control
button on it; the cart should respond accordingly.
• At this point, the cart should be paired with the remote and
respond to commands issued by the remote control buttons.
• If the cart loses contact with the remote and does not respond
to commands from it, you should re-pair them following the
steps described above.
3.3.8 Folding and transporting the trolley
EN