Publicidad
Idiomas disponibles
Idiomas disponibles
Milkshake Maker
MAIN PARTS
1. Stainless steel mixing cup
2. Removable mixing shaft
3. Tilting head
4. Milkshake maker base with power switch
5. Cup support and rest
Contents of Packaging
1. Milkshake maker base with mixing shaft
2. Stainless steel mixing cup
3. Instruction Manual
Assembly
1.
Unpack the milkshake maker from the box.
2.
Remove any unwanted packaging materials such as cardboard, plastics or styrofoam.
3.
Tilt the head back and pull down gently but firmly on the mixing shaft. After cleaning the
shaft, tilt the head back and gently but firmly push the shaft back into place until you
hear a soft snap.
4.
Wipe clean all the parts with a soft damp cloth or sponge and warm water. Rinse and
dry thoroughly. DO NOT IMMERSE THE MILKSHAKE MAKER BASE IN WATER OR ANY
OTHER LIQUID.
DO NOT USE ANY ABRASIVE MATERIALS TO CLEAN THE SURFACE
DO NOT IMMERSE THE MILKSHAKE MAKER BASE INTO WATER AT ANY TIME
AFTER SALES SUPPORT
888-367-7373
___________________________________PARTS
customer-service@wk-usa.com
3
Publicidad
